Filter
Top Products
4
Hints For Ironing
1. Sort out the articles to be ironed
according to the type of fabric.
This will minimize the frequency of
temperature adjustment for different
garments.
2. Test ironing a small area on the
backside or inside the garment if you
are unsure about the type of fabric.
Start with a low temperature and
increase gradually.
3. Wait for about three minutes
before ironing heat sensitive fabrics.
Temperature adjustment needs cer-
tain time to reach the required level
no matter it is higher or lower.
4. Delicate fabrics such as silk, wool,
velour, etc. are best ironed with an
ironing cloth to prevent shine marks.
5. You may need a few times of
press to activate the spray, burst
and vertically burst function.
Read The Garment Labels and
follow the manufacturer’s ironing
instructions that are often shown by
symbols similar to the follows:
How To Fill Water
1. Disconnect the iron from mains
supply outlet.
2. Move the Steam Control/Self-
Cleaning Knob to position.
3. Release the Water Inlet Cover
4. Fill water through the water inlet
hole.
5. Fill up to the ‘Max’ level marked
on the side of water tank.
Note:
Do not use chemically descaled
water or any other liquids.
First Time Ironing
1. Remove any protective films or
stickers from the sole plate and the
cabinet.
2. Grasp the cord and slowly pull out
to the length you desired (See How
to use the Cord storage features)
3. Fill the water tank. (See How To
Fill Water)
4. Connect the iron to a suitable
mains supply outlet.
Temperature Control Setting
. Cupro
. Polyester
. Silk
. Triacetate
. Viscose
. Wool
. Cotton
. Linen
. Acetate
. Elastsne
. Polyamide
. Polypropyl-
ene
3