Filter
Top Products
6
vertically in a safe place.
Note: Set the Steam Control Knob
to position after use.
Burst of Steam
This function provides extra amount
of steam to remove stubborn
wrinkles.
1. Fill the iron as described in the
section of How To Fill Water.
2. Turn the Temperature Dial to ‘•••’
(3 dots) setting.
3. Pilot light glows indicating the iron
is switched on.
4. Pilot light goes off when the
required temperature is reached.
5. The iron is ready for use.
6. Press the Burst Of Steam Button.
7. Steam will shoot from the holes
of the soleplate into the fabric being
ironed and removing the wrinkles.
8. For stubborn wrinkles, wait a
few seconds before pressing the
Burst of Steam Button again. Most
wrinkles can be removed within three
presses.
Note: It may be necessary to press
the burst of steam button a few
times to start this function.
For optimum steam quality, do not
operate the Burst Of Steam more
than three times in succession.
Burst of Steam in Vertical Posi-
tion
Warning: Do not apply steam on
any clothes or fabrics that are being
worn by human or pets. Tempera-
ture of steam is very high.
This function provides extra amount
of steam to remove wrinkles on deli-
cate garments in hanging position,
hanging curtains, or other hanging
fabrics.
1. Fill the iron as described in the
section of How To Fill Water.
2. Turn the Temperature Dial to
‘Max’ setting.
3. Pilot light glows indicating the iron
is switch on.