Beko 2820523327_FL Washer User Manual


  Open as PDF
of 79
 
73 / 76 EN
Washing Machine / User’s Manual
4.13 Starting the programme
PressStart/Pause/Cancelbuttontostarttheprogramme.
Startsymbolshowingthestartupoftheprogrammewillturn
on. Loading door is locked and Door Locked symbol appears
onthedisplay.Thesymbolofthestepfromwhichthe
programmehasstartedappearsonthedisplay(Prewash,
MainWash,Rinse,SoftenerandSpin).
4.14 Progress of programme
Progressofarunningprogrammeisindicatedonthedisplay
withasetofsymbols.
Relevant symbol appears on the display at the beginning of
each programme step and all symbols remain lit at the end
oftheprogramme.Thefarthermostrightsymbolindicates
the current programme step.
Prewash
IfthePrewashauxiliaryfunctionisselected,Prewashsymbol
appearsonthedisplayindicatingthattheprewashstephas
started.
Main Wash
MainWashsymbolindicatingthatthemainwashstephas
started appears on the display.
Rinse
Rinse symbol indicating that the rinsing step has started
appears on the display.
Softener
Softenersymbolindicatingthatthesoftenerstephasstarted
appears on the display.
Spin
Appears at the beginning of the final spin step and remains
litduringSpinandPumpspecialprogrammes.
C
Ifthemachinedoesnotpasstothespinningstep,
RinseHoldfunctionmightbeactiveortheautomatic
unbalanced load detection system might be activated
due to the unbalanced distribution of the laundry in the
machine.
4.15 Loading door lock
Thereisalockingsystemontheloadingdoorofthe
machinethatpreventsopeningofthedoorincaseswhen
thewaterlevelisunsuitable.
DoorLockedsymbolappearswhentheloadingdooris
locked.Thissymbolwillflashuntiltheloadingdoorbecomes
readytoopenwhenprogrammecompletesorthemachine
is paused. Do not force to open the loading door in this step.
Symboldisappearswhenthedoorisreadytoopen.Youcan
openthedoorwhenthesymboldisappears.
4.16 Changing the selections after
programme has started
Switching the machine to pause mode
PresstheStart/Pause/Cancelbuttontoswitchthe
machinetopausemode.Pausesymbolappearsonthe
displayindicatingthatthemachineispaused.Startsymbol
disappears.
Changing the speed and temperature settings for
auxiliary functions
Depending on the step the programme has reached, you
maycanceloractivatetheauxiliaryfunctions;see,"Auxiliary
function selection".
Youmayalsochangethespeedandtemperaturesettings;
see,"Spinspeedselection"and"Temperatureselection".
Adding or taking out laundry
PresstheStart/Pause/Cancelbuttontoswitchthe
machinetopausemode.Theprogrammefollow-uplightof
therelevantstepduringwhichthemachinewasswitched
intothepausemodewillflash.WaituntiltheLoadingDoor
can be opened. Open the Loading Door and add or take
out the laundry. Close the Loading Door. Make changes
inauxiliaryfunctions,temperatureandspeedsettingsif
necessary.PressStart/Pause/Cancelbuttontostartthe
machine.
C
Theloadingdoorwillnotopenifthewatertemperature
inthemachineishighorthewaterlevelisabovethe
door opening.
4.17 Child Lock
Use Child Lock function to prevent children from tampering
withthemachine.Thusyoucanavoidanychangesina
running programme.
C
YoucanswitchonandoffthemachinewithOn/Off
buttonwhentheChildLockisactive.Whenyouswitch
onthemachineagain,programmewillresumefrom
whereithasstopped.
To activate the Child Lock:
Pressandhold2
nd
and 4
th
AuxiliaryFunctionbuttonsfor3
seconds.“Con”appearsonthedisplay.
C
Samephrasewillappearonthedisplayifyoupress
anybuttonwhenChildLockisenabled.
To deactivate the Child Lock:
Pressandhold2
nd
and 4
th
AuxiliaryFunctionbuttonsfor3
seconds.“COFF”appearsonthedisplay.
C
Do not forget to disable the child lock at the end of
theprogrammeifitwasenabledbefore.Otherwise,
machinewillnotallowtoselectanewprogramme.
4.18 Cancelling the programme
PressandholdStart/Pause/Cancelbuttonfor3seconds.
Startsymbolflashes.Symbolofthestepatwhichthe
programmewascancelledremainslit."End"appearsonthe
display and the programme is cancelled.
C
Ifyouwanttoopentheloadingdoorafteryouhave
cancelled the programme but it is not possible to open
theloadingdoorsincethewaterlevelinthemachine
is above the loading door opening, then turn the
ProgrammeSelectionknobtoPump+Spinprogramme
anddischargethewaterinthemachine.
 previous next