Filter
Top Products
NA
11
www.aristonappliances.us
Program and Option Modifiers
Warning: Whether you select an option unsuitable to the chosen program the corresponding LED will blink for some seconds
and then will go out.
Instead, if the the chosen option is suitable to the chosen program the button LED will stay on.
Option modifiers
Superwash:
Use this option to select a more intensive wash and time program for the cotton (Sanitary, Heavy cotton, Regular cotton) and
synthetics-permanent press (Heavy synthetics, Regular Synthetics).
Pre-wash Button:
For heavily soiled loads, push this button to add an extra wash to any wash program (except 4-7-10-11 programs).
Easy Iron Button (Rinse Hold):
This option reduces the amount of creasing on fabrics, making them easier to iron.
Selecting this option the washing machine will reduce wash action and spin speed (max 600 rpm) for programs
5-6-7 and the machine will stop on the last rinse.
For the Silk program, the Easy iron (stop with water) option is automatically carried out also if the button Easy iron is not
pressed: the washer will pause the cycle in the final rinse with laundry soaking in water.
The machine will stay in this state until the Start/Cancel button is pressed again.
Extra Rinse:
Additional rinse Increases the efficiency of the rinse (except programs 8-9-10-11).
Note: This function will carry out a full extra rinse to ensure maximum possible detergent removal.
Particularly useful for people with sensitive skin.
Soaking:
This option allows you to leave your washing to soak for one hour during the wash cycle. During this time, your washing
machine is also tumbled every 2 minutes for 6 seconds (except programs 7, 8, 9, 10, 11).
Variable Spin Speed Dial:
Use this option to reduce the spin speed below the maximum for the program you have chosen.
Note: The washing machine will automatically prevent you from selecting a spin speed higher than the maximum speed for
each program.
Variable Temperature Dial:
Use this knob to set your wash water temperature. Choose between COLD, WARM, HOT, MAX or variations between.
Notes: - When you set the knob on Max the washing machine will load water either hot, warm or cold
according to the the chosen program, and anyhow at the higher level (of temperature) of the program.
- If the user selects the Program Sanitary and turn the Temperature knob to position Max, the time
duration of the cycle is longer as the heater element starts to achieve the temperature of 167°F (75° C)
(Sanitary).