Filter
Top Products
36
3. Air Connection
Incoming air connection to this system is an 1/8” F.P.T. (female pipe thread) as per the illustration below.
M. SHUTDOWN INSTRUCTIONS
If the dryer is to be shutdown (taken out of service) for a period of time, the following must be performed:
1. Discontinue power to the dryer either at the external disconnect switch or the circuit breaker.
2. Discontinue the heat supply:
a. GAS MODELS – discontinue the gas supply.
SHUT OFF external gas supply shutoff valve.
b. STEAM MODELS – discontinue the steam supply.
SHUT OFF external (location furnished) shutoff valve.