Filter
Top Products
35
L. OPERATING INSTRUCTIONS
NOTE: Before attempting to start the dryer the main door must be closed and the lint drawer securely
in place.
1. To start the dryer:
a. Microprocessor controller (computer) dryers...
1) Light emitting diode (L.E.D.) display will read REAdY (meaning no cycle in progress).
2) Press the letter on the keyboard (touch pad) corresponding to the cycle desired (i.e., key E)...
a) The dryer will then start (rotate).
3) L.E.D. display will now show Cycle In Progress and Cycle Status meaning that the dryer is in
the drying cycle (dry mode for 30 minutes) and count downwards in minutes.
NOTE: Pressing keyboard (touch pad) key A, B, C, D, and F will also start the dryer. The
six (6) preprogrammed drying cycles (A through F) have been stored in the
microprocessor controller (computer) memory. Refer to the Programming Manual supplied
with the dryer for more specific operating instructions.
NOTE: The dryer can be stopped at any time by opening the main door or by pressing the STOP
red key. To restart the dryer, press the START green key or a preprogrammed cycle key
(i.e., E).
NOTE: Selection (settings) changes can be made at any time during the drying cycle by pressing the
STOP red key twice. The L.E.D. display will return to REAdY at which time a new cycle
selection can be made.
b. Dual Timer Dryers
1) Select drying time and cool down time desired...
a) Turn heat timer clockwise (CW) to the desired time (i.e., 1 minute to 60 minutes).
b) Turn cool down timer clockwise (CW) to the desired time (i.e., 0 minutes to 30 minutes).
2) Select Drying Temperature (HI TEMP, LO TEMP, or PERM PRESS).
3) Push Start Button...
a) Dryer will now start.
4) To stop the dryer, open the main door.