Filter
Top Products
49
6. Lint drawer/screen not being cleaned on a regular basis or often enough.
7. Extractors (washers) not performing properly.
8. Sail switch is fluttering...restriction in exhaust... for GAS MODELS ONLY.
9. Failed microprocessor controller (computer)...temprature calibration is inaccurate.
10. Failed microprocessor temperature sensor...calibration is inaccurate.
11. Failed burner hi-limit ... for GAS MODELS ONLY.
12. Failed 225º hi-limit (thermostat).
13. Steam damper system not functioning properly ... for STEAM MODELS ONLY ...
a. Steam damper sticking closed.
b. Leak in pneumatic system.
Y. Excessive noise and/or vibration...
1. Dryer not leveled properly.
2. Impellor (fan) out of balance ...
a. Excessive lint build up on impellor (fan)...check air jet.
b. Failed impellor (fan).
3. Loose motor mount.
4. Failed idler bearings and/or tumbler bearings.
5. V-belt(s) either too tight or too loose.
6. Tumbler (basket) drive wheels are worn or loose.
7. Set screws of the tumbler drive shaft bearings are too loose.
8. Failed motor bearings.
9. Drive wheel trantorque is too loose.
Z. Scrapping or rubbing noise in tumbler (basket) area or around front or rear panels...
1. Check for object(s) caught somewhere in tumbler (basket).
2. Misadjusted thrust wheel(s).
3. Failed thrust wheel(s).