Filter
Top Products
50
AA. Tumbler (basket) jumps or makes excessive noise when dryer is first started or between
forward and reverse cycles...
1. Tumbler (basket) out of alignment.
BB. Blower (impellor/fan) air jet
does not activate at the end of the cooling cycle...
* With microprocessor controller (computer) "A JET" relay output L.E.D. (light emitting diode) is on.
1. Fault in compressed air supply.
2. Failed air jet.
* With microprocessor controller (computer) "A JET" relay output L.E.D. (light emitting diode) is off.
1. Failed microprocessor controller (computer)..