Filter
Top Products
30925 Rev. 3.04 February 2004
Builder’s Guide for AMD Opteron™ Processor-
Based Servers and Workstations
Appendix A AMD Opteron™
Processor-Based System Build Procedure
49
a. Turn off the system and unplug it before installing each card.
b.
Install additional cards one at a time.
c.
Restart the system after every card installation.
Note: If you have difficulties with the installation of any of the cards or drivers, refer to Complex
Configurations and IRQ Info
, available on the AMD website.
23. As you install each card, verify the card is properly seated (connector fully inserted into the
slot, front and back) and that the retention screws are in place.
24.
Test the complete system for proper operation. If system functions properly, load any other
software.