Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Maintenance
F232183
24
Monthly Preventive Maintenance
Checklist
Machine ____________________________
Operator
___________________________
Month
Checks
Observe All Safety Warnings!
Disconnect power to the washer-extractor before performing the
monthly maintenance procedures.
1. Each month OR after every 200 hours of operation, lubricate bearings.
2. Clean the AC drive fins.
3. Determine if belts require replacement or adjustment:
a. Check belts for uneven wear and frayed edges.
b. Verify that belts are properly tensioned.
c. Verify that belts are properly aligned.
4. Remove back panel and check hoses for leaks.
5. Check supply dispenser hoses and connections.
6. Clean inlet hose filter screens. Replace if worn or damaged.
7. Tighten motor mounting bolt locknuts and bearing bolt locknuts, if necessary.
8. Use compressed air to clean lint from motor.
9. Clean interior of washer-extractor, both basket and shell, by wiping with a
water-soaked sponge or cloth.
10. Use compressed air to clean moisture and dust from all electrical components.
11.
12.
13.
14.