Filter
Top Products
8
504607
Step 5:
Wipe Out Inside Of Dryer
Before using dryer for the first time, use an all-purpose
cleaner, or a detergent and water solution, and a damp
cloth to remove shipping dust from inside dryer drum.
Step 6:
Plug in the Dryer
Refer to Section on Electrical Requirements, and
connect the dryer to an electrical power source.
Step 7:
Check Installation
Refer to Installer Check on the back cover of this
manual and make sure that dryer is installed correctly.
D327IE2A
D275IE0C
ELECTRIC
Connect to 30 Amp circuit.
D254IE0B
GAS
Plug cord into separately
fused
15 Amp circuit.