Alliance Laundry Systems HC35 Washer User Manual


 
37
Installation
F232062
Figure 28
Note:
There are two different mounting bolt
layouts which may be used for the 80-pound
capacity machine. See Figure 28. The bolt
holes marked A are to be used for close
mounting—machines installed with a 1-inch
(25.4 mm) clearance between machines.
The bolt holes marked B are to be used for
standard mounting—machines installed with
a minimum clearance of 8 inches (203 mm)
between machines.
2. Adjust the drill depth gauge to match the
length of the J-bolt, minus 1-1/2 inches
(38 mm). See Figure 29.
Figure 29
MI003FE1A
80-Pound Capacity Machines
H026I