Agilent Technologies 10737L Washer/Dryer User Manual


 
Chapter 7O Agilent 10737L and Agilent 10737R Compact Three-Axis
Interferometers
Procedure
7O-18 Users Manual
Removing the high stability adapter (reference mirror)
To remove the high stability adapter, refer to figures 7O-1 and 7O-8,
and:
1 Use the 5/64-inch hex key to remove the two cap screws with springs
that hold the high stability adapter (reference mirror) to the
interferometer. Set the screws in a clean, safe place where they will not
be lost.
2 Remove the high stability adapter (reference mirror) from the
interferometer. Set the high stability adapter in a clean, safe place.
Figure 7O-8. Agilent 10737L Compact Three-Axis Interferometer with
Agilent 10706-60001 Alignment Aid
NOTE From here on, this procedure assumes that the interferometer is
installed on an Agilent adjustable mount.
Measurement
Beam
Input
Beam
Center on One
Measurement Beam
Alignment Aid 10706-60001
1
0
7
3
7
L
3
-
A
X
I
S
I
N
T
E
R
F
E
R
F
E
R
O
M
E
T
E
R
10737L
1073 7L