Filter
Top Products
Operating Instructions
14
Consumption values and time requirements
The values for selected programmes in the following tables were deter-
mined under standardized conditions. They are nonetheless a useful
guide for domestic use.
Before the First Wash
0 1. Pull the washing powder drawer out slightly.
2. Pour about 1 litre of water through the washing powder drawer into
the washing machine. The next time a programme is started the solu-
tion container will be closed and the eco-sluice can function correctly.
3. Run one wash cycle without washing:
– Programme knob on Position t 2 (COTTONS/LINEN);
– Temperature 95 °C;
– Only add half the quantity of detergent recommended by the manu-
facturer for a full load.
This removes residues left over from manufacture on the drum and so-
lution container.
Programme knob
Tempera-
ture selec-
tor
Filling
quantity
in kg
Water
in litres
Energy
in kWh
Time in
minutes
t 2 (COTTONS/LINEN) 95 5 57 1.90 140
t 2 (COTTONS/LINEN)
60
1)
1) Information: Programme setting for a test in accordance with EN 60 456. The
consumption values can deviate from the stated values depending on the water
pressure, hardness, inlet temperature, room temperature, type and quantity of
washing, the detergent powder/liquid used, fluctuations in the mains voltage and
selected additional functions.
5 54 0.95 128
t 2 (COTTONS/LINEN) 40 5 54 0.60 115
} 7 (EASY-CARES) 40 2.5 45 0.40 65
à 12 (DELICATES) 30 2.5 40 0.25 40
s 11 (WOOLLENS) 30 2 43 0.25 50