Filter
Top Products
degree of soiling and hardness of the water used.
Follow the product manufacturers’ instructions on quantities to use.
Use less detergent if:
• you are washing a small load,
• the laundry is lightly soiled,
• large amounts of foam form during washing. For the stain treatment before
the washing cycl, follow the product manufacturers’ instructions on
detergent quantities. If you use any specific product to remove the stains, you
must start the cycle of washing immediately .
Degrees of water hardness
Water hardness is classified in so-called “degrees” of hardness. Information on
hardness of the water in your area can be obtained from the relevant water
supply company, or from your local authority.
Note: A water softener must be added when water has a medium-high degree
of hardness (from degree of hardness II). Follow the manufacturer’s instructions.
The quantity of detergent can then always be adjusted to degree of hardness I (=
soft).
Preparing the drying cycle
As a dryer, the machine works on the condensation principle.
Therefore, the water tap must be open and the drain hose must drain
water into a sink or into the drain pipe, even during the drying cycle.
Attention!
Before starting the drying programme, reduce the loads of washed laundry, in
order to obtain good performances.
Laundry not suitable for drying
• Particularly delicate items such as synthetic curtains, woollen and silk, garments
with metal inserts, nylon stockings, bulky garments such as anoraks, bedcovers,
quilts, sleeping bags and duvets must not be machine dried.
28
iPreparing the drying cycle
Level
1
Characteristic
soft
Degrees of water hardness
GGeerrmmaann
°°ddHH
FFrreenncchh
°°TT..HH..
0-7 0-15
2 medium 8-14 16-25
3 hard 15-21 26-37
4 very hard
> 21 > 37
132962861.qxd 29/05/2008 11.35 Pagina 28