Filter
Top Products
Clean operating screen and housing
CAUTION!
Do not use furniture cleaners or aggressive cleaning agents to clean the machine.
Use a damp cloth to wipe down the operating screen and housing.
What to do if ...
Troubleshooting by yourself
If, during operation, the warning message appears on the LCD follow strictly guides included
in the message on the display. If you are not able to solve the problem, please inform your
local service force centre.
Problem Possible cause Remedy
Dryer does not work.
Mains plug is not plugged in or
fuse is not working correctly.
Plug in at mains socket. Check
fuse in fuse box (domestic in-
stallation).
Loading door is open. Close loading door.
Have you pressed the START
PAUSE button?
Press the START PAUSE button
again.
ProSteam programme does not
start. Message on the display:
The steam water tank is empty.
Please fill it and then press
START.
Water tank is empty. Fill water tank.
Recirculation valve is closed
(OFF position)
Turn the recirculation valve to
ON position.
After a ProSteam programme,
garments are not sufficiently
smooth.
Wrong programme selected
(e.g. SYNTHETICS instead of
COTTON).
Note the composition of the
fabric.
Too low a steam level set. Set a higher steam level.
Too many garments in ma-
chine, or garments that are too
different.
Load the machine with fewer
garments, or only similar ones.
Clothes are not removed until
the anti-crease phase is finish-
ed.
Remove clothes quickly one at
a time from the machine as
soon as possible after the start
of the anti-crease phase.
Garments not hung on clothes
hangers and/or not tugged into
shape.
Hang garments on clothes
hangers, do up buttons and tug
garments into shape.
Multi-layered garments tend
to lose their shape.
Reshape multi-layered gar-
ments by ironing after they
come out of the machine.
After a ProSteam programme,
there are no creases left in the
garments.
The ProSteam programme has
the effect of smoothing gar-
ments.
Iron creases in again after the
ProSteam programme.
32
What to do if ...