Filter
Top Products
Selecting the programme
Use the programme selector to set the programme
you require. The estimated programme duration
(in hours and minutes) appears in the multi-dis-
play as well as cycle finish time.
Select STEAM LEVEL
To achieve the best results, different steam levels are required for different volumes
of laundry.
The STEAM LEVEL button is used to set the required steam quantity of: MIN, MED
or MAX.
All ProSteam programmes, apart from the REFRESH programmes, automatically recognize
the remaining dampness in clothes. When laundry is wet, a drying cycle is activated first if
required. The table shows the steam levels appropriate for the selected load, under STEAM
LEVEL.
Press the STEAM LEVEL button repeatedly until the desired steam level (MIN, MED or MAX)
is shown in the display.
If the STEAM LEVEL button is not pressed after a ProSteam programme is selected, the
medium steam level (MED) is selected automatically. If you select a REFRESH programme,
MIN is selected automatically.
If in doubt, always select a lower steam level first until you have more experience
with load volumes, fabric types and the corresponding optimum steam level. If too
high steam level is selected, garments may lose their shape. If too low steam level
is selected, creases may remain.
Selecting additional options
The additional options available for the ProSteam programmes are LONG ANTICREASE,
BUZZER, SPIN SPEED
1)
and the CHILD LOCK.
1. By turning the knob choose a ProSteam programme.
2. To set the option press OPTION button. you will see available options on the screen.
3. Press repeatedly OPTION button to select proper option. Selection is marked by rec-
tangular border.
4. Press OK button to activate it. Suitable icon should appear on the right side of the
screen.
To deselect an option follow the same steps. Option icon should disappear.
1) available with cotton/easy care and cotton/synthetic shirts programmes
ProSteam system
17