Filter
Top Products
Instructions for use
23
Start the Washing Program
0 1. Check that the water valve is open.
2. Start the washing program: Press the button
START/PAUSE (START/PAUZE, MARCHE/PAUSE).
The washing program is started or it starts after
the set time expires.
3
If the indicator DOOR/LIGHT (DEUR/LICHT, PORTE/ECLAIR.) lights up red
when the button START/PAUSE (START/PAUZE, MARCHE/PAUSE) is
pressed, the filling door is not correctly closed. Press the filling door
firmly closed and press the button START/PAUSE (START/PAUZE,
MARCHE/PAUSE) again.
If the time preselection is set:
The set time preselection runs and the remaining time until the pro-
gram start is shown in the multi-display (in full hours in each case).
During this time you can load washing or change / abort the time
preselection.
• Load washing: Press the button START/PAUSE (START/PAUZE,
MARCHE/ PAUSE). The filling door can be opened. Next, close the
door and again press the button START/PAUSE (START/PAUZE,
MARCHE/PAUSE).
• Change or abort time preselection: Press the button DELAY TIMER
(STARTTIJDKEUZE, DEPART DIFFERE) as often as necessary until the re-
quired time is displayed; When the program run time is displayed
(shown in minutes, e.g.125), the washing program starts without de-
lay.