Filter
Top Products
Instructions for use
20
Set the Delay Timer
0 Set the delay timer if necessary:
Press the button DELAY TIMER (STARTTIJD-
KEUZE, DEPART DIFFERE) as often as neces-
sary until the required start delay is shown in
the multi-display, for example in the form
12h for a program start delay 12 hours.
If19h is displayed and you press again, the run time of the set washing
program (display in minutes, e. g.125) appears. In this state, the delay
timer is not set.
If the button SOAKING (INWEKEN, TREMPAGE) is pressed, the delay
timer determines the soaking time. (Without timer delay, the soaking
time is approx. 1 hour.)
Opening and Closing the Filling Door
0 Open: Press the button DOOR/LIGHT (DEUR/LI-
CHT, PORTE/ECLAIR.). The filling door springs
open.
0 Close: Press the filling door firmly closed.
When the unit is switched on, the display DOOR/LIGHT (DEUR/LICHT,
PORTE/ECLAIR.) shows whether the filling door can be opened:
3
The washing drum is illuminated when the filling door is open. The light
goes out automatically after approx. 3 minutes.
– green: The door can be opened (not when the program saving func-
tion is activated, for details see the section ”Program Saving”)
– off: The door cannot be opened at present
– red: The door is open