Filter
Top Products
4. Slide out the relevant plastic spacers.
5. Open the porthole, take out the inlet hose from the drum and remove the
polystyrene block fitted on the door seal.
6. Fill the smaller upper hole and the two large ones with the corresponding plastic
plug caps supplied in the bag containing the instruction booklet.
7. Connect the water inlet hose as described under the paragraph «Water inlet».
All the different plug caps are supplied with the appliance in the plastic bag containing
the instruction booklet.
38
Installation
HEC0010
HEC0005
132963641.qxd 14/10/2008 9.00 Pagina 38