Filter
Top Products
18
Use
Cancelling the delayed start
● set the washing machine to PAUSE by pressing the button 8;
● press button 9 once until the symbol 0’ is displayed;
● press the button 8 again to start the programme.
Important!
● The selected delay can be changed only after selecting the washing programme
again.
● The door will be locked throughout the delay time. If you need to open the
door, you must first set the washing machine to PAUSE by pressing the button
8. After you have closed the door, press the button 8 again.
The button
9 can not be selected with DRAIN programme.
Select an additional rinse
This appliance is designed for saving water. However, for people with a very
delicate skin (allergic to detergents) it may be necessary to rinse the laundry
using an extra quantity of water (extra rinse).
Press simultaneously the buttons
2 and 3 for some seconds: the pilot light
10.2 comes on.
This function stays permanently on. To disable it press the same buttons again
until the pilot light
10.2 goes off.
Altering an option or a running programme
It is possible to change some options before the programme carries it out. Before
you make any change, you must pause the washing machine by pressing the
button
8. Changing a running programme is possible only by resetting it. Turn
the programme selector dial to
O
and then to the new programme position.
Start the new programme by depressing the button
8 again. The washing water
in the tub will not be emptied out.
Interrupting a programme
Depress the button 8 to interrupt a programme which is running, the
corresponding light starts flashing. Depress the button again to restart the
programme.
Cancelling a programme
Turn the selector dial to
O
to cancel a programme which is running. Now you
can select a new programme.
132963641.qxd 14/10/2008 9.00 Pagina 18