Filter
Top Products
Programme progress display
The display shows the different washing programme phases.
After the appliance starts operating, the display show the relevant symbol of the
washing phase which is running:
WASHING, RINSING, DRAINING,
SPINNING.
Door symbol
This symbol indicates if the door can be opened:
● symbol on: the door cannot be opened. The appliance is running or the
machine has stopped with water in the tub.
● symbol off: the door can be opened. The washing programme is finished.
Indicator pilot lights (10)
If the OVERDOSAGE pilot light 10.1 goes on at the end of
the programme, it indicates that too much detergent has been
used.
When the appliance is performing additional rinses, the
EXTRA RINSE pilot light
10.2 comes on. To add an additional rinse, please see
chapter «Select an additional rinse».
If your laundry is not removed during 10 minutes after the programme is finished,
the backlight of the display switches off and the energy saving system will be
enabled.
Only the button
8 pilot light flashes to indicate that the appliance has to be
switched off.
By pressing any buttons the appliance will come out from the energy saving status
and you could set another washing programme or switch off the appliance.
12
Control panel
10.1
10.2
7.4
7.5
132963641.qxd 14/10/2008 9.00 Pagina 12