Filter
Top Products
5. Take out fine strainer.
6. Remove fluff from fine strainer. It is best
to use a damp hand for this purpose.
Clean the entire filter area
The strainer area does not have to be
cleaned after every drying cycle, but
should be checked regularly and cleaned
of fluff if necessary.
7. To do this, grip the top of the large mesh
filter and pull it forwards until it comes
loose from the two brackets.
8. Remove fluff from the entire filter area.
It is best to use a vacuum cleaner for this
purpose.
9. Press both journals of the large mesh
filter into the brackets on the loading
door until they snap into place.
10. Re-insert fine strainer.
11. Press against the large mesh filter until
it locks into the interlock.
If the fine strainer is not fitted, the large mesh
filter will not snap into place and the loading door
cannot be closed.
Cleaning the door seal
Wipe the door seal with a damp cloth immediately after the drying cycle has finished.
Emptying the condensate tank
Empty condensate tank after every drying cycle.
If the condensate tank is full, an active programme will break off automatically and the
warning led light up. In order to continue the programme, the condensate tank must first
be emptied.
Care and cleaning
17