Filter
Top Products
50
Installation
Unpacking
All transit bolts and packing must be removed before using the appliance.
Using a spanner,
unscrew and
remove the 2 rear
bottom screws.
Slide out the 2
plastic pins. Lay
the machine on
its back, taking
care not to
squash the hoses.
This can be avoided by placing one of the
corner packing pieces between the machine
and the floor.
Remove the polystyrene block from the
bottom of the machine and release the two
plastic bags.
Carefully slide out the left-hand bag
removing it towards the right and then
downwards.
Slide out the right-hand bag removing it towards the left and then
upwards.
Carry out the bot-
tom cover placed
into the drum of
your appliance, lay
its hook as the
arrow «A» indicates
and push the top
of the cover to
seal it closed.
Important!
You can find more detailed instructions regarding the bottom cover assemblig
in its relative bag.
P1129
P1124
2
3
1
6
5
A
P0001
132988620.qxd 12/07/2004 16:07 Pagina 50 (Nero/Process Black pellicola)