AEG 16810 Washer/Dryer User Manual


 
43
Service
In the section “Something not working?” some problems that can be
solved by yourself are listed. Read this section in the event of problems.
If you are not able to find a solution, contact the Service centre.
In all cases, explain your problem carefully, in order to facilitate trou-
bleshooting: the engineer will be able to decide whether a service call
is necessary.
Take note of the serial number (Ser.No.) and the product number (Prod.
No.) indicated on the rating plate.
Ser. No. . . . . . . . . . . . . . . . . . . . . . .
Prod. No. . . . . . . . . . . . . . . . . . . . . .
Furthermore, try to specify, as precisely as possible:
- The symptoms of the fault
- When the fault occurs
- The alarm code displayed
When can a service visit be charged during the guarantee period?
- when it should have been possible to solve the problem by yourself,
with the help of the troubleshooting chart (see section “Something
not working?”)
- when the engineer has to come out several times because he has
not been given all the relevant information he needs and so, for
example, has to fetch spare parts. Repeated trips can be avoided if
you prepare your call to the Service centre as described above.
42
Made in EEC
Mod. L 16810 Type P6359679
Prod.No. 914601620 00
220-230V~50Hz 2200W 10 A
Ser.No.
IPX4
Technical data
Height x Width x Depth 84x60x57 cm
Depth with door opened 100.5 cm
Height adjustment ± 10 mm approx.
Rated load (depending on programme) 6 kg
Use domestic
Drum speed during washing max. 55 rpm
Drum speed during spinning 1600/1200/900/700/400 rpm
Water pressure 50-800 kPa
This appliance complies with the following EC directives:
- 73/23/EEC of 19.2.1973 “Low voltage directive”, including directive
93 / 68 / EEC
- 89/336/EEC of 3.5.1989 “Electromagnetic Compatibility Directive”.