Filter
Top Products
Door seal
Check from time to time the door seal and
eliminate eventual possible objects that could
be trapped in the fold.
Drain pump
The pump should be inspected regularly and
particularly if
the machine does not empty and/or spin
the machine makes an unusual noise during draining due to objects
such as safety pins, coins etc. blocking the pump.
Proceed as follows:
Disconnect the appliance.
If necessary wait until the water has cooled down.
Open the pump door.
Place a container close to the pump to collect any spillage.
Release the emer-
gency emptying
hose, place it in
the container and
remove its cap.
When no more
water comes out,
unscrew the
pump and remove
it. Always keep a rag nearby to dry up
spillage of water when removing the pump.
Remove any objects from the pump
impeller by rotating it.
Put the cap back on the emergency empty-
ing hose and place the latter back in its
seat.
Screw the pump fully in.
Close the pump door.
Water inlet filter
If you notice that the machine is taking longer to fill, check that the
filter in the water inlet hose is not blocked.
Turn off the water tap.
29
Cleaning and maintenance
132986190.qxd 16/02/2005 11:56 Pagina 29