Filter
Top Products
Starting the programme
1. Check that the water tap is open.
2. Press START/PAUSE to start the programme.
If the Delay Start option has been selected the
programme will start at the end of the count-
down.
If the DOOR light is red and flashing for some seconds and when
it goes out the END light starts flashing, the alarm code E40
appears in the display, it indicates that the door is open. Close the
door and press the START/PAUSE button again.
If the delay start option has been selected, the machine starts its
countdown, in hours, which will appear on the display. During this
period it is possible to load other laundry, to cancel the delay time.
• Load other laundry: press the START/PAUSE button. Open the door.
Load the laundry. Close the door and press the START/PAUSE button
again.
• Cancel the delay time: press the START/PAUSE button. Press the
DELAY START button until 0’ appears on the display. Press the
START/ PAUSE button again.
Programme progress display
By selecting the wash programme, the pilot lights corre-
sponding to the various phases making up the pro-
gramme come on. After the machine has started, only
the running phase pilot light stays on.
Display
The time to the end of the programme decreases minute by minute and
appears on the display.
24
How to wash
132986190.qxd 16/02/2005 11:56 Pagina 24