Filter
Top Products
25
How to wash
At the end of the programme
The machine stops automatically. A zero appears on the display. The
END light comes on in the programme progress display. The
START/PAUSE button is off, the DOOR light is green.
If the light (OVERDOSAGE) comes
on it indicates that too much detergent has been used. At the next
wash carefully follow the detergent manufacturer’s instructions. Mea-
sure out detergent according to amount, type, degree of soil of fabrics
and water hardness.
This light could come on also when the drain filter is blocked.
If the RINSE HOLD option has been selected, the water must be
emptied out before opening the door.
To empty out water there are two possibilities:
• select the (DRAIN) programme to empty out the water without
spinning;
• select the
/
(SPIN/DELICATE SPIN) programmes for spinning;
• select the SPIN SPEED and depress the START/PAUSE button.
Warning! The programme selector dial must be turned first to RESET O
and then to the
,
or programme.
Turn the selector dial to O.
Remove the laundry from the drum.
Check that the drum is empty so as to avoid any forgotten items
being damaged in a subsequent wash (e.g. shrinking) or their colour
running into a load of whites.
Close the water tap.
Leave the door open to prevent the formation of mildew and unpleas-
ant smells.
132986190.qxd 16/02/2005 11:56 Pagina 25