Chapter 10 Packages
Media Server User’s Guide
241
Click Applications > pyLoad to open the following screen.
Figure 128 Applications > pyLoad
The following table describes the labels in this screen.
10.10 Polkast Setup
Use the Package Management screen to install the Polkast package. Use Polkast for fast, secure,
direct access to your Media Server from your iPad, iPhone or Android device. Use the following
procedure to install the Polkast package.
1 Click Applications > Package and select Polkast. Then select the Install/Upgrade icon.
Table 74 Applications > pyLoad
LABEL DESCRIPTION
Enable pyLoad Select this to have the NSA manage your downloads. Clear it to turn the
feature off.
Management Page This is the IP address and port number of the NSA’s pyLoad management
login screen. The pyLoad management login screen uses the NSA’s IPv4
address and the port number you configure. Click this link to go to it.
Username Only the admin account can log into the pyLoad management screen.
Password You can configure a separate password for using the admin account to access
the NSA’s pyLoad management screen.
Password (Confirm) Type the same password again to make sure you entered it correctly.
Port Number Set the pyLoad management page’s port number. The range of valid port
numbers is 1024~65536. Include this port number after the IP address when
manually entering the pyLoad management login page’s address in your
browser’s address bar. For example, 192.168.1.2:7272.
Apply Click this to save your changes.
Reset Click this to restore the screen’s last-saved settings.
