Configuration
Configuration and Calibration Sequence
Z4Mplus and Z6Mplus User Guide 63
MEDIA TYPE Press SELECT to make change.
Setting Media Type: Press PLUS (+) or MINUS (–) to
display other choices.
Default: Non-Continuous
Selections: Non-continuous, Continuous
Press SELECT to accept the change.
This parameter tells the printer the type of media you are
using. Selecting continuous media requires that you include
a label length instruction in your label format (^LLxxxx if
you are using ZPL or ZPL II).
When non-continuous media is selected, the printer feeds
media to calculate label length (the distance between two
detections of the inter-label gap, webbing, or alignment
notch or hole).
SENSOR TYPE Press SELECT to make change.
Setting the Sensor Type: Press PLUS (+) or MINUS (–) to
display other choices.
Default: Web
Selections: Web, mark
Press SELECT to accept the change.
This parameter tells the printer whether you are using media
with a web (gap or space between labels, notch, or hole) to
indicate the separation between labels or if you are using
media with a black mark printed on the back. If your media
does not have black marks on the back, leave your printer at
the default setting (web).
Display Shows Action/Explanation
