102 Z4Mplus and Z6Mplus User Guide
Troubleshooting
LCD Error Conditions and Warnings
Warning — CUTTER JAM
OUT OF MEMORY*
Caution • Cutter blade is sharp. Use caution when cleaning. Do not rub the blade
with your fingers.
Problem Solution
Cutter blade is in the media
path.
Turn off the printer power and unplug the
printer. Inspect the cutter module for debris
and clean as needed following the cleaning
instructions on page 93.
Problem Solution
*There is not enough memory to
perform the function shown on
the second line of the error
message.
Insufficient DRAM for the label length,
downloaded fonts/graphics, and images.
Ensure that the device, such as FLASH
memory or PCMCIA card, is installed and
not write protected or full.
Ensure that the data is not directed to a
device that is not installed or available.
