62 Z4Mplus and Z6Mplus User Guide
Configuration
Configuration and Calibration Sequence
TEAR OFF Press SELECT to make change.
Adjusting the Tear-off Position: Press PLUS (+) to
increase the value, press MINUS (–) to decrease the value.
Each press adjusts the tear-off position by four dot rows.
Default: +0
Range: –120 to +120
Press SELECT to accept the change.
This parameter establishes the position of the media over the
tear-off/peel-off bar after printing. The label and liner can be
torn off or cut between labels.
PRINT MODE Press SELECT to make change.
Selecting Print Mode: Press PLUS (+) or MINUS (–) to
display other choices.
Default: Tear-off
Selections: Tear-off, cutter, peel-off, rewind
Press SELECT to accept the change.
Print mode settings tell the printer the method of media
delivery that you wish to use. Be sure to select a print mode
that your hardware configuration supports as some
selections displayed are for optional printer features.
Display Shows Action/Explanation
