A SERVICE OF

logo

Xerox
®
DocuMate
®
4760
User’s Guide
186
3. Firmly pull the roller housing towards you. You will hear it release from the scanner cover. Leverage the roller
housing out of the scanner.
4. Place the roller housing face down on a flat surface.
5. Pinch the arms on either side of the roller module and pull the roller module out of the housing.
6. Discard the roller, it cannot be repaired or reused.
7. Before installing the new roller, clean any dust that may have gotten on it during shipping.
8. Place the new roller module in the housing a press down, on the back of the roller module, until the arms on the
roller module snap into place.