K-9
E6581301
11
[6] Speed/torque reference gain/bias setup [2/2] Sensorless vector/vector with sensor (Ɣ:Effective, -:Ineffective)
Title
Communi
cation
No.
Function Adjustment range
setting unit
(Panel/Communi
cation)
Default
setting
running
PM
control
V/f Reference
Speed
control
Torque
control
H
CXH
HJ
H
0~250% (for torque control etc.)
H
0~250% (for torque control
H
H
RX input point 1 frequency
H
H
RX input point 2 frequency
HJ
H
250~250% (for torque control etc.)
H
50~250% (for torque control etc.)
H
H
1 input point 1 frequency
H
H
1 input point 2 frequency
HJ
H
0~250% (for torque control etc.)
H
0~250% (for torque control etc.)
H
H
2 input point 1 frequency
H
H
2 input point 2 frequency
HJ
H
0234
RP/high speed pulse input point
0~100%
1/1 0 Enabled Ɣ/Ɣ - Ɣ Ɣ *3
H
0235
0.0~HJ Hz
0.1/0.01 0.0 Enabled Ɣ/Ɣ - Ɣ Ɣ *3
H
0236
RP/high speed pulse input point
0~100%
1/1 100 Enabled Ɣ/Ɣ - Ɣ Ɣ *3
H
0237
RP/high speed pulse input point
0.0~HJ Hz
0.1/0.01 *4 Enabled Ɣ/Ɣ - Ɣ Ɣ *3
This parameter moves to a fundamental parameter.
*1: For details, refer to Instruction Manual (E6581331) specified in Section 6.42.
*2: For details, refer to Instruction Manual (E6581341) specified in Section 6.42.
*3: For details, refer to Instruction Manual (E6581319) specified in Section 6.42.
*4: Inverter with a model number ending with -WN, HN: 60.0 -WP: 50.0
[7] Operation frequency Sensorless vector/vector with sensor (Ɣ:Effective, -:Ineffective)
Title
Communi
cation
No.
Function Adjustment range
setting unit
(Panel/Communi
cation)
Default
setting
running
PM
control
V/f Reference
Speed
control
Torque
control
H
Starting frequency setting
H
Operation start frequency
HJ
H
0242
Operation start frequency
0.0~30.0Hz
0.1/0.01 0.0 Enabled Ɣ/Ɣ - Ɣ Ɣ 6. 7. 2
H
H
Frequency command dead band
H
0245
1/1 0 Disabled Ɣ/Ɣ - Ɣ Ɣ 6. 7. 1
