E6581373
- 9 -
3. Configurations
3.1. Neuron ID
LONWORKS
device has the individual Neuron ID. The ID is indicated on the option unit as the barcode
(EAN128). Products have 3 sticker labels where the Neuron ID is indicated.
3.2. Service pin
Service pin function causes the node to propagate the service message over the network so that the
network controller finds the node. There is Service pin as a mechanical switch on the L
ONWORKS option
unit (refer to an attached instruction manual in detail).
3.3. Device interface (XIF) file
Device interface (XIF) files are the files that define the network-visible interface for one or more
L
ONWORKS
devices. The device interface is the interface to a device that is exposed over a LONWORKS
network. The device interface includes the device’s self-documentation information, the number of
address table entries, the number of message tags, and the number, types, and directions of network
variables.
XIF files are distributed on our web site “www.inverter.co.jp”.
3.4. LNS Plug-in
LNS Plug-in provides one or more means to monitor or alter configuration properties or network
variables. It may be used for device-specific configuration or monitoring.
The device plug-ins are also distributed on our web site “www.inverter.co.jp”.
3.5. Inverter configurations
Set the inverter parameters according to the instruction manual attached with the product.
However, L
ONWORKS option unit will edit some of the inverter parameters (fh, ul, ll, acc, dec,
vl) so that they should not be edited.
Configuration by PC commissioning software (PCM001Z) is also available by using serial
communication option (USB001Z) through RS485 port.
N.B.: Refer to Section 2.3 for RS485 port specification in detail.
