A SERVICE OF

logo

Open as PDF
next previous
11
1.2 for mounting clip mechanical details. Once the mounting clip is
securely attached to the panel, the unit enclosure can be snapped onto
the clip’s retaining tabs.
• For fixed DIN rail mounting, a combination of the above two techniques
can be employed. First, snap the mounting clip onto a DIN rail and
position it in its desired location. Then, the mounting clip can be bolted to
the DIN rail support panel, securing it in place. Lastly, the unit can be
snapped onto the fixed mounting clip.
In all cases, the unit can be easily unsnapped from the mounting clip to
temporarily provide easier access to the configuration switches, chassis
ground terminal or network connector.