A SERVICE OF

logo

Rack Mount Cabinets
Changing Plug for Power Strip BRPSB240A
Strata CTX I&M 06/04 5-31
Rack Mount Cabinets
5. Pull out cable from the power plug (shown below).
Step 2: Attach NEMA L6-20P Plug to Power Strip
1. Strip 1.49 inches (38mm) of cover off the electrical wire.
2. At the wire tip, strip approx. .47 inches (12mm) from the outer cover of the wire (shown
below).
3. Each of the three electrical wires are inserted in a power plug and a screw tightened. The torque
of a screw is 0.8[Nm]. The wires and power plug matches in the following manner (shown
below):
G (FG) matches the green wire.
Y matches the black wire.
X matches the white wire.