Specifications
66
6
❖
❖❖
❖ Combine
• When using this function, the machine selects the reproduction ratio auto-
matically. This reproduction ratio depends on copy paper sizes and the
number of originals.
• The reproduction ratios you can specify are 50–200%.
• If the calculated ratio is under the minimum ratio, it is automatically ad-
justed to within available range. However, with some ratios, parts of the
image might not be copied.
• You cannot use custom size paper.
• If the orientation of originals is different from that of the copy paper, the
machine will automatically rotate the image by 90° to make copies proper-
ly.
• If the number of originals placed is less than the number specified for com-
bining, the last page segment is left blank as shown.
❖
❖❖
❖ Duplex Margin (Type 3 only)
• If you set a binding margin that is too wide, part of the image may not be
copied.
• When making copies using the Combine function, the binding margin is
added to the copies when combining is finished.
KirC2_ENcopyF_FM.book Page 66 Monday, September 22, 2003 11:36 AM
