10
Display
This section explains how to read the display and use the Selection key for the
initial copy display.
Note
❒ The copy display is set as the default screen when the machine is turned on.
❖
❖❖
❖ Initial copy display
1.
Operational status or messages
2.
Messages and the selected tray
appear here. Currently selected
items appear in brackets.
3.
Number of copies set.
4.
Reduce/Enlarge ratio function for
non-fixed ratios.
Reading the Display and Using Keys
This section explains how to read the display and use the selection key for the
initial copy display.
Note
❒ The copy display is set as the default screen when the machine is turned on.
1.
Selection keys
Correspond to items at the bottom line on
the display.
Example: initial copy display
• When the instruction “press [100%]”
appears in this manual, press the left
selection key.
• When the instruction “press [R/E]” ap-
pears in this manual, press the center
selection key.
• When the instruction “press [Auto
R/E]” appears in this manual, press the
right selection key.
AAX024S
1 32
4
AAI024S
OK
Cancel
2 3
1
AAI048S
KirC2_ENcopyF_FM.book Page 10 Monday, September 22, 2003 11:36 AM
