Introduction
This manual describes detailed instructions on the ope
ration and notes about the use of this machine.
To get maximum versatility from this machine all oper
ators are requested to read this manual carefully
and follow the instructions. Please keep this manual
in a handy place near the machine.
Important
Contents of this manual are subject to chang
e without prior notice. In no event will the company
be li-
able for direct, indirect, special, incidental, or cons
equential damages as a result of handling or oper
-
ating the machine.
Notes
Some illustrations in this manual might be slightly di
fferent from the machine.
Certain options might not be available in some c
ountries. For details, please contact your local dealer
.
Laser Safety:
CDRH Regulations
This equipment complies with requirements of
21 CFR subchapter J for class 1 laser products. Thi
s
equipment contains a 5 milliwatt, 760-800 nano
meter wavelength, GaAlAs laser diode. This equipment
does not emit hazardous light, since the beam is to
tally enclosed during all customer modes of oper-
ation and maintenance.
Warning:
Use of controls or adjustment or performance
of procedures other than those specified in this manu
al
might result in hazardous radiation exposure.
Notes:
The model names of the machines do not appear
in the following pages. Check the type of your ma-
chine before reading this manual. (For details, see P
.7 “Machine Types”
.)
• Type 1: 4015/DSm615/LD115/Aficio 2015
• Type 2: 4018/DSm618/LD118/Aficio 2018
• Type 3: 4018d/DSm618d/LD118d/Aficio 2018D
Certain types might not be available in some c
ountries. For details, please contact your local dealer
.
Two kinds of size notation are employed in
this manual. With this machine refer to the inch versio
n.
For good copy quality, the supplier recommends tha
t you use genuine toner from the supplier.
The supplier shall not be responsible for any damage
or expense that might result from the use of parts
other than genuine parts from the supplier with y
our office products.
Power Source
120V, 60Hz, 12A or more
Please be sure to connect the power cord to a power
source as above. For details about power source,
see P.59
“Power Connection”
.
