A SERVICE OF

logo

1.
2.
3.
Open the master eject
container cover and
remove the master
eject box.
Remove the misfed
master from master
eject section.
Reinstall the master
eject box and close
the master eject con-
tainer cover.
4. Press the Reset key.
5. Press the Print
Start key.
. When the master eject box is full, remove the used masters from the box.
1.
2.
3.
Open the master eject
unit by pushing the
master eject unit open
button.
Remove the misfed
paper.
Close the master
eject unit.
4. Press the Reset key.
5. Press the Print
~ I Start kev.
t
II
while printing on thick paper, lift the wing guide release lever to the
. If misfeeds occur
thick paper position. (Refer to page 22 for details.)
48