A SERVICE OF

logo

Open as PDF
next previous
Monitoring and Configuring the Printer
108
4
channel frequency
“channel no.”
You can enable or
disable the WEP
function. To enable
the WEP function,
specify [on]; to dis-
able it, specify
[off].
To start the WEP
function, enter the
correct WEP key.
enc {on|off} You can enable or
disable the WEP
function. To enable
the WEP function,
specify [on]; to dis-
able it, specify
[off].
To start the WEP
function, enter the
correct WEP key.
Parameter Value configured
key { “key value” }
val {1|2|3|4}
You can specify
the WEP key when
entering in hexa-
decimal.
With a 64-bit WEP,
you can use 10 dig-
it hexadecimals.
With a 128-bit
WEP, you can use
26 digit hexadeci-
mals.
Up to four WEP
keys can be regis-
tered. Specify the
number to be reg-
istered with “val”.
When a WEP is
specified by key,
the WEP specified
by key phrase is
overwritten.
To use this func-
tion, set the same
key number and
WEP key for all
ports that transmit
data to each other.
You can omit the
numbers with
“val”. The key
number is set to 1
when making
these omissions.
Parameter Value configured