37
3. Replenishing Supplies
Loading Paper into the Paper Feed Tray
The Load Paper indicator (B) and the
machine indicator “A” lights when
the paper feed tray runs out of paper.
Replenishing Paper
A Press the {Clear/Stop} key.
Note
❒ This step is necessary only if
you want to pause a print run to
replenish paper.
B Lower the paper feed tray adjust-
ment lever.
Note
❒ The top sheet of paper might re-
main between the feed rollers.
In this case, remove the top
sheet.
C Load paper into the paper feed
tray.
Note
❒ Correct paper curl before set-
ting the paper.
D Shift the tray adjustment lever to
the paper feeding position.
Note
❒ Before you start printing, the
paper feed tray must be aligned
with the feeding position. If not,
a paper misfeed might occur.
E Press the {Print Start} key to re-
sume printing.
Titanium2_EN-F2_FM_forPaper.book Page 37 Wednesday, January 25, 2006 6:30 PM
