Printing on Different Types of Paper Thickness
25
1
Printing on Different Types of Paper
Thickness
Depending on the thickness of the pa-
per that you are printing on, you need
to perform the following steps.
Feed Roller Pressure Lever
A Shift the feed roller pressure le-
ver to the Thick or Standard paper
position.
Note
❒ Shift the lever according to the
paper weights as shown in the
following table.
❒ If the feed roller pressure lever
is at the Standard paper posi-
tion, and paper misfeeds occur
even though you are using pa-
per within the specified range,
move the lever to the Thick pa-
per position.
B Make sure that the paper feed
side plates touch the paper light-
ly.
C When you have finished printing,
shift the feed roller pressure lever
back to the Standard paper posi-
tion.
Metric version
Inch version
Thick 81.6–127.9
g/m
2
21.7–34.0 lb.
Stan-
dard
35–81.5 g/m
2
9.3–21.6 lb.
Titanium2_EN-F2_FM_forPaper.book Page 25 Wednesday, January 25, 2006 6:30 PM
