System Settings
42
2
❖ Key Repeat
You can enable or disable repetition of an operation if a key on the screen or
control panel is pressed continuously.
The default setting is Normal.
❖ Z-fold Position
If you specify Z-folding, set the fold-back position in 1 mm (0.1") increments.
The setting ranges of the folding position for each paper size are shown be-
low:
•Metric version:
• A3: 2 - 25 mm
• B4 JIS: 2 - 40 mm
• A4: 2 - 10 mm
• 11 × 17: 2 - 20 mm
•8
1
/
2
× 14: 2-35 mm
• Inch version:
• A3: 0.1" - 1.0"
• B4 JIS: 0.1" - 1.6"
• A4: 0.1" - 0.4"
• 11 × 17: 0.1" - 0.8"
•8
1
/
2
× 14: 0.1" - 1.4"
The default setting is 2 mm (Metric version) / 0.1" (Inch version).
Note
❒ If the Panel Key Sound setting is [Off], the beeper does not sound, whatever
the Warm-up Beeper setting.
❒ The Function Reset Timer setting is ignored if Interleave is set for Print Prior-
ity.
Reference
p.3 “Accessing User Tools”
“Function Compatibility”, Copy/Document Server Reference
Output tray settings
Important
❒ You cannot interrupt the current stapling job even if a stapling job is specified
by a different function.
❒ If Staple or Shift Sort is selected on a machine equipped with Booklet Finisher,
3,000Sheet-100Sheet Staple Finisher, or 3,000Sheet-50Sheet Staple Finisher,
copies are output to “Finisher Upper Tray”, “Finisher Shift Tray”, or “Finish-
er Booklet Tray”, regardless of the current output destination setting.
