Special Senders to Treat Differently
163
4
Reference
p.148 “Parameter Settings”
p.237 “Registering Folders”
Print 2 Sided
This section describes how to specify Print 2 Sided.
Specify when programming a Special Sender.
A Press [Print 2 Sided per Sender].
B Press [On] or [Off], and then press [OK].
Note
❒ Selecting [Same as Basic Settings] will result in the same setting made for “2
Sided Print” of “Reception Settings”.
Memory Lock
This section describes how to specify Memory Lock.
Specify when programming a Special Sender.
A Press [Memory Lock RX per Sender].
B Press [On] or [Off], and then press [OK].
Note
❒ Selecting [Same as Basic Settings] will result in the same setting made for
“Program Memory Lock ID” under “Administrator Tools”.
Paper Tray per Sender
This section describes how to specify Paper Tray.
Specify when programming a Special Sender.
A Press [Paper Tray per Sender].
B Select the tray you want to use, and then press [OK].
Note
❒ Selecting [Same as Basic Settings] will result in the same setting made for
“Paper Tray” of “Reception Settings”.
