System
187
5
❖ Memory Usage
You can select the amount of memory used in Font Priority or Frame Priority,
according to paper size or resolution.
The default setting is Frame Priority.
• Font Priority
This setting uses memory for registering fonts.
•Frame Priority
This setting uses frame memory for high speed printing.
❖ Duplex
Set two-sided printing.
The default setting is Off.
❖ Copies
Set the number of copies from 1 to 999 in units of one copy. The default setting
is “1 copy”.
•1-999
The default setting is 1 Copies.
❖ Blank Page Print
You can select whether or not to print blank pages.
The default setting is On.
Pages that match one of the following conditions are identified as blank.
• There are no images.
• There are images but they are outside of the printable area.
• There are only blank characters.
❖ Toner Saving
Select either to apply or not to apply Toner Saving.
The default setting is Off.
❖ Spool Image
You can select to print spool images. The print job transmitted from the com-
puter is temporarily stored on the machine's hard disk as bitmap images that
can be printed when transmission is complete. If more than one print job is
transmitted, a spool image is printed for each.
The default setting is Off.
❖ Reserved Job Waiting Time
You can specify how long the machine waits to receive a print job before al-
lowing other functions such as the copier and scanner functions to interrupt
it.
The default setting is Short Wait.
❖ Printer Language
You can specify the printer language.
The default setting is Auto.
This menu appears only when the PostScript 3 unit (optional) is installed.
