16 Raymarine SR100 Sirius Weather System - Installation Guide
It is normal during the first minute of initial power that the SR100 status
LED shows no activity and remains off. During the second minute the status
LED will start to flash the amber or red fault strings. Typically, during
normal operation, a flashing green LED will occur within 90 seconds of
initial power. If there is no LED indication of any sort displayed after 90
seconds you should check the in-line fuse or circuit breaker.
A blinking red LED indicates an internal fault condition. If this condition
persists contact Raymarine Technical Services.
Accessories
The following accessories are available from your local dealer, national
distributor or Raymarine Customer Service Department:
The following accessories are available from your local Shakespeare dealer:
Amber 1 sec. ON, 1 sec. OFF, 1 sec.
ON, 2 sec. OFF
SeaTalk
hs
cable
disconnected
Red Blinking Internal fault
LED color LED pattern Description
Part No. Description
E55049
1.5 m SeaTalk
hs
Network cable
E55050
5 m SeaTalk
hs
Network cable
E55051
10 m SeaTalk
hs
Network cable
E55052
20 m SeaTalk
hs
Network cable
Part No Description
SRS-35 35 ft. antenna cable and connectors
SRS-50 50 ft. antenna cable and connectors
SRS-90 90 ft. antenna cable and connectors
87067_1.book Page 16 Wednesday, February 22, 2006 7:44 AM
