9. Programmable Features
63
9.2 Basic features
Feature/Code Selection
Setting the date and time
{#}{1}{0}{1}
Enter the date and time using the dial keypad. See page 23 for details.
Setting your logo
{#}{1}{0}{2}
Enter your logo using the dial keypad. See page 24 for details.
Setting your fax number
{#}{1}{0}{3}
Enter your fax number using the dial keypad. See page 25 for details.
Setting the location where
you use
{#}{1}{1}{4}
This setting must match your location.
{1} “Middle East” (default): To use in Middle East.
{2} “Malaysia”: To use in Malaysia.
{3} “Asia”: To use in Asia.
{4} “Australia”: To use in Australia.
{5} “New Zealand”: To use in New Zealand.
{6} “Tunisia”: To use in Tunisia.
{7} “Africa”: To use in Africa.
Setting the dialling mode
{#}{1}{2}{0}
{1} “Pulse”
{2} “Tone” (default)
Note:
L This feature may not be available depending on feature #114 setting (page
3).
See page 20 for details.
Setting recall/flash time
{#}{1}{2}{1}
The recall/flash time depends on your telephone exchange or host PBX.
{0} “900ms”
{1} “700ms”
{2} “600ms”
{3} “400ms”
{4} “300ms”
{5} “250ms”
{6} “200ms”
{7} “160ms”
{8} “110ms”
{9} “100ms”
{*} “90ms”
{#} “80ms”
Note:
L The default may vary depending on feature #114 setting.
L If the unit is connected via a PBX, PBX functions (transferring a call, etc.)
might not work correctly. Consult your PBX supplier for the correct setting.
Selecting the scale
{#}{1}{4}{7}
{1} “Millimetres” (default)
{2} “Inches”
Note:
L The selected scale will be used when measurements are shown on the
unit’s display.
