1. Introduction and Installation
17
room at all times. If you print using moist paper, it
may cause paper jam.
1 Pull the standard input tray (1) until it clicks into
place, then pull it completely out, lifting the front part
of the tray.
2 Before loading a stack of paper, fan the paper to
prevent paper jams.
3 Pinch the right side of the recording paper guide
(2), then slide it to match the paper size mark.
Pinch the front and back recording paper guides (3)
at the same time, then slide them together to match
the paper size mark.
4 Load the paper, print-side up (4).
Important:
L Push down to lock the plate (5) in the
standard input tray, if it has come up.
L Make sure that the recording paper guides (6)
are at the paper size mark and the recording
paper is under the paper limit mark (7). The
paper should not be loaded over the tab (8).
1
2
3
5
4
6 8
6
7
